Digitrade HS128 Manual do Utilizador descarregar pdf (Página 48)

English

After starting up and identifying a valid smart card the display on the

DIGITTRADE HS128 / HS256 illuminates and is ready for you to enter the

PIN.

Now the 8-digit PIN can be

entered.

The factory set PIN is:

1-2-3-4-5-6-7-8

Enter the PIN using the touch

pad

Then conﬁrm with „ENTER“.

3.2 Entering the smart card PIN

Note: to guarantee the safety of your data it is very important to change

the factory set PIN (Page 57). Change the smart card pin periodically. It is

recommended to use different PINs for different cards.

After successful smart card PIN input, the cryptographic key is transferred

to the encryption module. The DIGITTRADE HS128 / HS256 is recognised

as a removable media device and the LEDs on the touch pad go out.

You can now access the storage device. The Smart card must stay in the

DIGITTRADE HS128 / HS256 whilst in operation. If the smart card is re-

moved from the slot then the storage device will be blocked (Lock-Out

Mode).

If wanted this function can be deactivated, so that the smart card can be

removed after starting up and unlocking the HS128 / HS256 it is then fur-

thermore accessible. More information in chapter 4.2.

If a wrong PIN has been entered the „ERROR“-LED illuminates. Press the

„ESC“ Button to re-enter your PIN.

Note: The smart card is automatically disabled and useless as soon as the

8-digit PIN has been incorrectly entered 8 times. The cryptographic key in

the smart card is irreversibly deleted in the process.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 75 76

Sem comentários

Digitrade HS128 Manual do Utilizador Página 48